|
The following comments are owned by the user that posted them. STLegacyFiles is not responsible for their content.
Total comments: 36 | Last comment: 01-31-2011 at 19:08
Luke20 (Staff)
From:  (Southampton)
Joined: January 11th, 2004
Posts: 753 | Yeah, I tried this earlier today before it was put on here.
It should work for most people who have minimum spec... but not for everyone, unfortunetly including yours truely. 
Anyway, its a good tutorial  |
MEGA_MAX
Joined: October 16th, 2005
Posts: 88 | what do you mean by Accessed? |
Henze
From: 
Joined: June 26th, 2005
Posts: 625 | files which are read by the computer because legacy.exe is requesting that. |
pepper1986
Joined: November 27th, 2006
Posts: 2 | know whats funny my pc doesn't even meet the specs not even close and it plays it fine i havent gotting this access violation once yet |
Henze
From:
Joined: June 26th, 2005
Posts: 625 | systemrequirements are way to high and what i am thinking is: they randomly choosed the supported cards. because some nonsupported cards runs fine, and some supported cards get's this error... |
ewm91
From:  (washington dc)
Joined: October 26th, 2003
Posts: 309 | I did not get the game work after folowing the what the .doc said.
Can eny one help me find out if my sound card has the problom tolked about in the .doc? |
Henze
From:
Joined: June 26th, 2005
Posts: 625 | #6: wait until i pmed you or just wait someone replies at the forums, you are not the only one with that problem...
really i can see you everywhere, and the first moment i noticed you was when you pmed. and most likely i would have noticed you on the forum. just be patient
and your problem was just your onboard intel graphics controller |
Zarnywoop
Joined: February 26th, 2002
Posts: 30 | "supported" usually means that they give technical assistance to people with that hardware... it doesnt neccesarily mean that it wont work on them. |
Henze
From:
Joined: June 26th, 2005
Posts: 625 | that's why i think they randomly choosed it. because they force you to buy another graphics card. and sometimes even that won't work.
they had to test that out. made a beta of the game or so. |
Genesis119
From: (Massachusetts)
Joined: April 9th, 2005
Posts: 162 | I did everything it said to do in steps 1-5, and it still crashes on startup. Any other words of wisdom that might be able to fix this problem? Because I'm NOT deleting everything in the Shaders folder like this thing's telling me to. |
Henze
From:
Joined: June 26th, 2005
Posts: 625 | but it's the only way capt'n.
you can of course make a backup of the shaders folder in case it did not work.  |
Magpie70
From: (Newcastle upon Tyne)
Joined: December 23rd, 2006
Posts: 1 | I followed the fix to the letter but still got the access violation window. I tried the fix again but went straight from step 6 to step 9 ( only deleted the files in the post process folder ), BINGO !! The thing works ,so far so good.
Respect goes out to Hello , no doubt & Henze.
FYI , P4,2.8ghz , 512RAM, Radeon 9200-128 |
ime001
From: (Texas)
Joined: December 25th, 2006
Posts: 1 | I need some clearification on step 4. You say to create a file and name it "admiral.prf". What KIND of file am I suppose to create?!?!?! I figured I'm suppose to create a file folder, maybe, but I just don't know. Someone please help me.
Thanks |
ceres
Joined: September 2nd, 2002
Posts: 50 | "7. Return to the folder "aders" and remove any files that where NOT accessed between the first time and the last time you ran the game in step 7."
It says to delete the .fxo and fx. files... but I think that there is no need for that, just ignore step 7 (don't delete the fiiles) and jump directly to step 9.
though AVE still happens every first loading of a new mission.
Thanks for the fix now I can play STL.... ^__^
p.s.
does anyone of you peeps experience the missing/hangging/not responding mouse pointer after several actions ingame? Also the monitor flickkering turning to black screen-sounds hang-returns to normal play-then black screen again then tada!! alt+f4 because it won't return to normal again, and you have to restart your PC.... Is this a problem with my card? (my card is Radeon 9250 256mb)
I've tried running dxdiagnostic after the black screen thingie and it says that direct 3D and diriect Draw is not functional. |
Henze
From:
Joined: June 26th, 2005
Posts: 625 | that depends,
for some people that isn't required. for some other people they have to. |
Starforce_2
From: (st paul mn)
Joined: December 29th, 2006
Posts: 70 | Ive tried that or not tried it and I've deleted the contents of the folder in the aders folder and only one file was access so I deleted the rest. I still get access violation crash. I don't even get to see the menu. Specs are:
p4 3.2 ghz
ati x1600xt 512 mb with ati 6.12 drivers from ati site
direct x 9 installed from legacy CD
1gb ram.
and it just keeps crashing. I've set all the settings for the video car to min then max and no change. |
Henze
From:
Joined: June 26th, 2005
Posts: 625 | try with installing the 9.0c december release...
do the steps again, this time delete only the files in the postprocessfolder and leave the files in the shader folder, while keeping THAT folder renamed to aders |
legacy_5902
From: (blackpool)
Joined: March 10th, 2007
Posts: 197 | at last!!!!!!!!
it`s about time someone found out how to fix the "Acess violation error"
downloadng now..... |
SpecialForces
Joined: April 20th, 2008
Posts: 22 | i bet it wont work on my star trek i never manage to understand those with changing file stuff... |
jhill2378
Joined: May 21st, 2008
Posts: 1 | EXCEPTION: ACCESS VIOLATION
0x0056e747
0x10cf1974
0x10b3b424
0x61746144
0xfffffbf8
EAX:00000000h ESI:052025d0h
EBX:00000002h EDI:00000000h
ECX:10f30ca0h EBP:10a256d0h
EDX:0012fb8ch ESP:0012fb7ch
EIP:0056e747h EID:00000000h
SS: 00000023h CS: 0000001bh
DS: 00000023h FS: 0000003bh
ES: 00000023h GS: 00000000h
Flags: 00010202h CF:0 PF:0 AF:0 ZF:0 SF:0 OF:0
I get this randomly during the game. it happens at different times and is never when i try to start the game, always during play. whats wrong? |
chestermike
From:
Joined: June 2nd, 2008
Posts: 1 | I have tried the steps and the game still does not work. I think I am going wrong in step 4. I can create the file easily enough, but after you have created it what do you do with it??? Do you copy it into the game file? Or into 'aders'??? Or what?
Please help. |
picarda805
Joined: August 8th, 2007
Posts: 50 | I did the tutorial and both patches and I just got a new code it is 0x0056d693 PLEASE Help!!!!!!!! |
picarda805
Joined: August 8th, 2007
Posts: 50 | chestermike you rename the shaders folder aders not the admiral.prf |
deaks25
Joined: July 22nd, 2008
Posts: 3 | #15. I get the same problem with my 9250 (128Mb). All you need to do is pause the game when the screen goes blank, then hit 'Alt' & 'Tab', which Minimizes the game, then just click on the game to maximize it again and it should be fine. The stoppage is quite random 
If anyone knows how to fix this problem permanently, would be greatly appreciated |
fisherd
From:
Joined: March 7th, 2009
Posts: 2 | i unistalled the game when i wanted to restart from frensh. it worked before perfectly. but now it will not work. i tried this tutorial and it didn't work, still getting the error |
muldrf
From:
Joined: November 3rd, 2008
Posts: 229 | Try Deleting the C: Program Files Bethesda Softworks Star Trek Legacy folder. Most likely you have files remaining in that folder after you uninstalled it, and they are causing your Legacy to crash once it's reinstalled. |
MARKYNCC
Joined: April 12th, 2009
Posts: 162 | I have had this problem in the past and 'muldrf' is correct, you most likely have files left over. Legacy will only uninstall the original files and folders, if you have added anything to it such as maps, ships etc they will be left over. The best advice I can give you, if you cant get it to work, is to
Uninstall the game.
Search for any files relating to Star Trek Legacy and delete them all.
Look for a file called 'STLsave' and delete this also.
Reinstall the game, a box usually comes up asking which directory you want to install Legacy to. When this box appears add a 1 on the end: so instead of:
(C rogram files Bethesda SoftworksStar Trek Legacy)
it reads
(Crogram files Bethesda SoftworksStar Trek Legacy1)
you wont have any problems at all, as this will install a brand new copy of Legacy in a brand new directory , and any errors or mods you installed previously wont be included.
Hope this helps. |
MARKYNCC
Joined: April 12th, 2009
Posts: 162 | The sticking out tounge faces shouldnt be in there! the way I have written the comment caused it! |
MARKYNCC
Joined: April 12th, 2009
Posts: 162 | the Exception Violation, has got nothing to do with computer specs, this box appears when something has been added to or changed in the game and has missing or incorrect files.
e.g.
Assigning a weopan to a ship when the weopans not installed in Legacy! latest example of this is the STXI Kelvin ship, as soon as you tried to fire the phasers, it crashed you to the desktop, reason, missing odf file!!
altering the phasers on a ships odf file and getting 1 letter wrong, due to a typing mistake!
so if the game worked before your last mod, go back and look carefully through your game files where you changed things, you will find a mistake!
it is very easy believe me!
The same applies when you install a new ship, and you get the big white cube with a red bug on the side, that signifies missing files or incorrectly altered files, check! |
acidfluxxbass
From: (Portsmouth)
Joined: August 16th, 2007
Posts: 1627 | @ MARKY, I'm afraid it does relate to the computer specs. |
Aussie_Rob
From:  (Tasmania)
Joined: June 8th, 2008
Posts: 13 | teah i have no idea wtf i doing |
chicodennard
From:
Joined: April 12th, 2010
Posts: 1 | Another trick that I thought of did work. If you have access to another computer that the game does work on, copy the entire "Star Trek Legacy" folder to an external hard drive. Then past that folder in your the Bethesda Softworks folder. Make sure you click copy and replace if the computer prompts you. This worked for me. Good Luck!! And Enjoy the Game. Chico Newark, NJ |
ngforever1989
From: (Ohio)
Joined: June 7th, 2007
Posts: 154 | i dont get it, how am i supposed to know if the files were accesed? |
ngforever1989
From: (Ohio)
Joined: June 7th, 2007
Posts: 154 | btw i got mine to work but all i did was use compatibility mode for XP SP2, the first time EVER that thing actually helped me lol---sry for dbl post |
dmbgreystreet08
From: (NY)
Joined: December 1st, 2008
Posts: 280 | i just got this error while playing UU:
EXCEPTION: ACCESS VIOLATION
0x005e6990
0x0508800c
0x00633290
0x8be98b55
EAX:ffffff00h ESI:07edc8a4h
EBX:00000002h EDI:080e3994h
ECX:00000000h EBP:07edc8a4h
EDX:080e3994h ESP:0013fc04h
EIP:005e6990h EID:00000000h
SS: 00000023h CS: 0000001bh
DS: 00000023h FS: 0000003bh
thoughts? |
When posting comments, you must follow these rules:- No "Yay I got First Post!" posts, no exceptions and no matter what other content the post has!
- No Pornographic Material. Any sexually oriented imagery or links to such content will not be tolerated.
- No Warez or Illegal Software. This includes linking to software, posting about it, and suggesting to get it.
- No Cursing or Swear words. We encourage you to use our comment sections as a forum to debate files, news, etc., but please use proper adjectives to express yourself. We will not tolerate abuse upon another member or author.
- No Attacks / Retaliation of any kind against a member, or group of members.
- Please do not advertise for other sites or forums here.
- Maximum of 3 smileys per regular member.
The high interactivity of this site should be considered a luxury, not a right. If you cannot follow these simple rules, you can and will be warned or banned from the comments, site or the entire network for any period of time.
Now enjoy yourself and behave!
|
USA Central
